top of page


The SSD7580B is the industry's most verstaile, high-performance PCIe Gen4 NVMe RAID HBA. The dedicated PCIe 4.0 x16 host interface and 8 independent device channels are capable of supporting over 100TB of hot-swappable NVMe storage, at speeds up to 28,000MB/s!

The compact, half-height form factor can be easily installed into nearly any industry standard PC-based server, workstation and rackmount platform running Windows and Linux based operating systems.

Like other members of the SSD7500 series product family, the SSD7580B is well equipped to tackle an extensive range of high-performance applications including AI training and analysis, high-speed data acquisition and security solutions, scientific modeling and imaging systems, 3D rendering and design, and HD media production and editing platforms.


Performance Focused Hardware Architecture

HighPoint’s unique performance-focused NVMe architecture utilizes intelligent switch technology to allocate up to x4 lanes of bandwidth to each NVMe device port. This enables the SSD7580B 8-port U.2 RAID controller to fully saturate x16 lanes of host bandwidth using as little as four NVMe SSDs.

However, additional SSDs can be added to maximize storage capacity, or fine tune the configuration for a specific application by optimizing a RAID array for sequential or random I/O.


Streamline Service Workflows with True Hot-Swap & Hot-Plug Capability

SSD7580B controllers combine the flexible serviceability of SAS/SATA solutions with the performance and reliability of enterprise U.2 storage. Integrated hot-plug and hot-swap support works exactly like you expect it to; it effectively eliminates the need to power down or reboot a system in order to add or remove NVMe SSDs.

The SSD7580’s true Hot-Plug and Hot-Swap capability enable administrators to add or remove one or more drives on the fly, as necessity demands. This includes RAID and single-drive configurations. The controller will notify the system of any changes in real time – no reboot required!

In addition, a wide selection of flexible cabling options is available for the SSD7580B, which enable the controller to host both RAID, non-RAID, and mixed configurations of U.2 or M.2 NVMe SSDs, via SFF8639, SFF-8643 and SFF-8611 backplanes.

SSD6540M_banner.png
SSD6540M_banner.png

SSD7580B

PCIe 4.0 x16 8-Port U.2 NVMe RAID HBA


Industry's First High-performance PCIe Gen4 NVMe RAID HBA with True Hot-Plug Support 


SSD6540M_banner.png

Specifications

Product feature

Bus Interface

PCI-Express 4.0 x16

Number of Channel / Port

8x U.2 NVMe port (SFF-8654; Dedicated Dual PCIe 4.0 x4 per port)

Port Type

8x U.2 NVMe

Data Transfer Rate

16GT/s

Number of device

8x U.2/U.3 NVMe SSD

SSD Form Factor

2.5" U.2

Form Factor

Low Profile

Card Dimensions

6.50''W *2.71''H *0.91''D

Card Weight

0.64 lbs

Warranty

2 Years

Supported Operating Systems

Windows

Windows 11 ,10; Windows Server 2022, 2019, 2016; Microsoft Hyper-V; Only supports 64 bit operating system.

Linux

RHEL/Debian/Ubuntu/Fedora/Proxmox/Rocky Linux(Linux kernel 3.10 and later) Only supports 64 bit operating system.

System Requirements

Mac Platforms:

Not supported

PC Platforms:

Any PC Systems or Motherboard with an industry standard PCIe x16 physical Slot (Bifurcation is not required). Note: PCIe 4.0 required for maximum performance.

Secure Boot(PC platforms)

Windows: Support Secure Boot Disable and Enable(Please download the UEFI driver corresponding to Secure Boot on the software download page)
Linux:Support Secure Boot disable

Hotplug

Yes

Cooling System

Anodized Aluminum Heat sink with built-in Low-Noise fan

NVMe Configurations

RAID Support

Single, RAID 0, 1, 10

TRIM RAID Support

Single, RAID 0, 1, 10

Storage Mode - NVMe

Data RAID (Non-Bootable)

Windows,Linux,Mac (Linux Driver can be installed via internet/network connection)

Boot RAID

Windows: Windows10, 11 Windows Server 2016,2019,2022
kernel3.10 and later (Linux Driver can be installed via internet/network connection)
Mac: Not supported

NVMe RAID Management

Management Suites

WebGUI (Browser-Based management tool )
CLI (Command Line Interface- scriptable configuration tool) 
API package
UEFI Tool & UEFI HII (BIOS interface via Human Interface Infrastructure Support)

SMTP Email Alert Notification

Yes

Alarm Buzzer

Yes

Storage Health Inspector

Yes

NVMe SMART status

Yes

Automatic and configurable RAID Rebuilding Priority

Yes

Auto resume incomplete rebuilding after power on or reboot system

Yes

Single-RAID or Multi-RAID Arrays per Controller

Yes

Cross-Sync RAID Solution Across Controllers

Yes (Windows,Linux)

Advanced RAID features

Flash ROM for Upgradeable UEFI

Yes

Bootable RAID Array

Yes

Multiple RAID Partitions supported

Yes

Online Array Roaming

Yes

RAID Quick Initialization for fast array setup

Yes

Global Hot Spare Disk support

Yes

Operating Environment

Work Temp

+5°C ~ + 55°C

Storage Temp

-20°C ~ +80°C

Operating Voltage

PCI-e: 12V, 3.3V

Power

Typical: 13.72W

MTBF (Mean Time Before Failure)

920,585 Hours

Certification / Approval

CE, FCC, RoHS, REACH, WEEE

Kit Contents

1x SSD7580B
1x Quick Installation Guide
1x Low-Profile bracket

Resources

System Backplane Cabling Guide for HighPoint NVMe RAID & AIC HBAs

System Backplane Cabling Guide for HighPoint NVMe RAID & AIC HBAs

Industry's Fastest 8-Port U.2 NVMe RAID Controller

Industry's Fastest 8-Port U.2 NVMe RAID Controller

NVMe RAID Solutions for AV Applications

NVMe RAID Solutions for AV Applications

Product Gallery

Product Family

Optional Accessories

8644-8644-220.png

SFF-8654 to U.2 SFF-8639 cable with a 15-pin SATA power connector. Each cable supports two U.2 NVMe SSDs.

Length: 0.6M (60cm)/23.62"

8644-8644-220.png

SFF-8654 (host) to SFF-8611 Oculink (device) PCle 4.0 x8 NVMe cable. Each cable can host up to 2x NVMe SSDs.

Length: 0.5M (50cm) /19"

8644-8644-220.png

SFF-8654 (host) to SFF-8643 (device) PCle 4.0 x8 NVMe cable. Each cable can host up to 2x NVMe SSDs.

Length: 1M (100cm)/39.37"

spe
down
faq
bottom of page