top of page

The WebGUI connect to a Thunderbolt RAID Enclosure in macOS

  • 6 days ago
  • 2 min read

This knowledge base (KB) applies to the following Enclosures.

 

Table 1: Support Enclosures

 

Support NVMe RAID AICs

R3700 Series/ RR2800 Series/ RR2700 Series/ RR800 Series/RR600 Series/ RS64xxTS/ RS6618T/ RS6628T/ RS6674T

RR4500 Series/ RS64xxAS/ RS6314A/ RS6318A/ RS6618A/ RS6628A

 

There are several possible reasons why the WebGUI would be unable to connect to the RAID Enclosure:

1. The RAID Enclosure’s Controller isn’t recognized by the system.

2. The Device ID is incorrect.

3. The HighPointIOP/HighPointRR driver isn’t loading.

1) Confirm the Enclosure’s RAID Controller is recognized by the Mac system.

Under System Profile, click on PCI and look for the RocketRAID controller entry (RR4520 example shown below):

RS6314A,RS6318A,RS6618A,RS6628A: Device ID:0x4520

RS6618T,RS6628T,RS6674T: Device ID:0x0840


2) Confirm the RAID Controller’s Device ID.

As shown above, the ID should correspond with the Enclosure’s RAID controller.

3) Confirm the Driver is loading.

As shown above “Driver Installed” should be listed as “Yes”.

  • For RR4500 Series/RS64xxAS/RS6314A/RS6318A/RS6618A/RS6628A products:

System InformationàSoftwareàExtensionsàHighPointIOP


  • For RR3700 Series/RR2800 Series/RR2700 Series/RR800 Series/RR600 Series/RS64xxTS/RS6618T/RS6628T/RS6674T products:

System InformationàSoftwareàExtensionsàHighPointRR


4) Confirm the Enclosure is recognized as a Thunderbolt Device.

Under System Profile, click on Thunderbolt and look for the RocketStor Enclosure entry:


5) Contact our Support Department if you are not able to resolve the issue.

Some technical issues may require advanced support, or direct assistance from our software engineers. In these cases, we will need a copy of your system log file (also known as the event log).The System Log typically records errors, device failures, and software or driver related incidents. This information can help our engineers narrow down or even identify the source of the problem you are experiencing. Please refer to the following guide:

Contact Support: To contact our Support Department, visit our Online Web Support Portal

 

Recent Posts

See All
Rocket 8631x Series FAQ

Q1: Why does the RoketStor 8631D include 2x8-Pin power cables? A: Standard 8-pin cables are rated for 150W. The RocketStor 8631D uses a Native 12VHPWR connection to deliver a clean, direct 16-pin stre

 
 
 

Comments


bottom of page