RAID Expansion (OCE & ORLM)

This knowledge base (KB) applies to the following NVMe RAID AICs.

Table 1: Support NVMe RAID AICs

Support NVMe RAID AICs

SATA/ SAS RAID series Note: macOS is not supported.

RAID Expansion (OCE/ORLM)

Important: Before using OCE/ORLM, we recommend that you Verify the current RAID array, using the WebGUI’s Verify function, under Maintenance. The OCE/ORLM process is irreversible; once you start an OCE/ORLM procedure, the process can be temporarily paused (using the Maintenance option), but it must ultimately be resumed until completion.

OCE – Online Capacity Expansion

OCE allows you to add storage capacity to an existing RAID array while preserving your existing data. In most cases, this feature is used when adding one or more physical drives to an array (for example, expanding from a 3-drive RAID 5 configuration to a 7-drive RAID 5 configuration).

• To Expand an Array:

1. Start the WebGUI and click the Logical tab.

2. Locate the array you want to expand, and click the Maintenance option displayed to the far-right of the interface:

3. Under the “JBOD/Volume” drop-down menu, make sure you select the array’s current RAID level. In this example, the target array is a RAID 5 configuration:

4. Click the ORLM button continue. The WebGUI will display the following warning message. Click OK if you wish to proceed.

5. This will open the Array transform/transforming menu:

6. Check the box before the top entry (A) – this is the current array.

7. Check the box for each additional drive you want to add to the array (B).

8. Click Create. The WebGUI will announce that your new configuration was created successfully. Click OK to continue.

9. The Status will change to “Migrating” and will display a progress bar:

10. Once complete, your operating system will recognize the additional capacity as unpartitioned space – you are free to partition/format this space as a separate volume, or expand the current partition to include this space.

ORLM – Online RAID Level Migration

ORLM allows you to change one RAID level to another RAID level while preserving your existing data; for example, converting a RAID 5 array to a RAID 6 array.

• To Migrate a RAID Array to another RAID Level:

1. Start the WebGUI and click the Logical tab.

2. Locate the array you want to expand, and click the Maintenance option displayed to the far-right of the interface.

3. Under the “JBOD/Volume” drop-down menu, make sure you specify the new RAID level you want to create. In this example, the target array is a RAID 5 configuration. They will add 4 additional drives and change the array to RAID6.

4. Click the ORLM button continue. The WebGUI will display the following warning message. Click OK if you wish to proceed.

5. This will open the Array transform/transforming menu.

6. Check the box before the top entry (A) – this is the current array.

7. Check the box for each additional drive you want to add to the array (B).

8. Click Create. The WebGUI will announce that your new configuration was created successfully. Click OK to continue.

9. The Status will change to Migrating and will display a progress bar.

10. Once complete, your operating system will recognize the additional capacity as un-partitioned space; you are free to partition/format this space as a separate volume, or expand the current partition to include this space.