HighPoint Global Web Support

faq FAQ Article

How to do RAID OCE under Mac?(320)

Environment

The information in this article applies to:

Question

How to do OCE operation under Mac OS X?

Answer

OCE operation is supported with the latest version of HighPoint RAID Management software(WebGUI).
Upgrade the WebGUI then follow below steps to do a OCE operation:
Step 1: Add the new disk to the RocketRAID/RocketStor series product.
Step 2: Boot to the OS, and then start the web GUI.
Step 3: Click on the Maintenance link and initiate the OCE procedure.
Step 4: Select the same RAID level or you have the option to change it.
Step 5: Choose all of the members and begin the OCE process
Step 6: After the OCE operation is done, Mac system will not recognize the additional disk space by default. Run the Mac OS X disk utility , select the disk array and use repair disk option to let the system realizes the additional space is present.

Article

FAQ0053 Published Feb 11th 2015
Author: HPT-Support-01
Keywords: OCE


THE INFORMATION IN THIS DOCUMENT IS PROVIDED ON AN AS-IS BASIS WITHOUT WARRANTY OF ANY KIND. PROVIDER SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PROVIDER BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, SPECIAL OR INCIDENTAL DAMAGES, EVEN IF PROVIDER HAS BEEN ADVISED BY USER OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE. USER AGREES TO HOLD PROVIDER HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS, LOSSES, LIABILITIES AND EXPENSES.

Back To List

About HighPoint Global Support Visit HighPoint website at www.highpoint-tech.com