Specification

Maintenance and Management Settings RAID Monitoring Tools
RAID Array Roaming
Unplug/Remove RAID array
Hot key (ctrl-h) boot-up RAID manager via BIOS
Firmware update while running the Operating System
Verify RAID Array for Bad Sectors and Parity Check
Task Scheduler
Automatic RAID rebuild
Automatic drive (insert / removal) detection
Hot Spare Disk
Staggered Drive Spinup
Rebuild Priority (Low - Highest)
Spin Down Idle Mode
Hot Swap and Hot plug
Bad sector repair and remapping to reduce dropped drives
Multiple RAID array
Multiple Logical Drive
64bit LBA support greater than 2TB per volume
SMTP for email notification
Alarm / Buzzer alerts for drive failure
SES-2 enclosure management (Failed, SMART (SHI))
Enclosure management support I2C
Hard Drive LED indicators (Activity and Failed)
SHI (Storage Health Inspector – Drive analysis from S.M.A.R.T)
Event Log
RAID Management Suite
Command Line Interface (CLI)
Web browser-base RAID management software
API
Card Information
Operating Temperature Work Temp: +5°C ~+ 55°C
Storage Temp: -20°C ~ +80°C
Relative Humidity: 5% ~ 60% non condensing
Operating Voltage  3.3V (4W max) / 12V (1W max)
Regulator Certification EMI: FCC Part 15 Class B and CE
MTBF Mean Time Before Failure 920,585 Hours