(6) Question: My array is reported as broken every time the system reboots - I am forced to recreate the array. What can I do to solve this problem?
Answer:
Aside from a physical hard disk problem, the most common cause of array loss are loose power or IDE cables.
Make sure all cables connected to the drives and Rocket card are secure. Change cables if necessary.

A failing or under-powered power supply can also lead to this problem. If the drives do not power on and "spin" up correctly during bootup, the RAID controller may not detect one or more of the drives - this may result in a broken array.
 
© 2007 HighPoint Technologies, Inc