(1) Question:  The card's BIOS does not detect the hard drive(s) attached to the host adapter card. What can I do to correct this problem?
Answer:
Make sure the power and IDE cables are securely attached to the hard disks, and the host adapter.
Check the drive(s) jumper settings, and make sure they correspond with the drive's configuration.

If drives are configured as master/slave (sharing a single cable), try setting each drive to cable-select.

If only one drive is attached to an IDE cable, set the drive to master. Some drives may require a single-master setting (or master with no slave present).
Check the drive documentation or contact the manufacturer for more information.
 
© 2007 HighPoint Technologies, Inc